FORGOT YOUR DETAILS?

LIGHTS / SIGHT GLASSES / QUICKPORTS
CANTY fiber optic lighting systems have been designed to provide efficient, high LED light in a cost effective package. CANTY uses only high quality, flexible fiber optic light pipes to guide the light from our light source through a sight glass or process connection. The light is focused into the fiber optic light pipe and guided through the sight glass minimizing losses while maximizing your tank or vessel lighting!All CANTY sight glasses feature the Fuseview™ window. Our unique fused glass windows far exceed all conventional tempered glass windows in safety and performance. By fusing glass to metal, a high pressure, high temperature, hermetic seal is formed. The fused glass technology ensures safest sight glass with every Fuseview™.

ANSI / DIN FUSEVIEW™ SIGHT GLASS

CANTY Fuseview™ sight glasses have been engineered to meet all your process and safety needs. All standard Fuseviews™ were designed and tested to ensure the safest product available.

GLASS WETTED FUSEVIEW™ SIGHT GLASS

The glass-wetted Fuseview™ is designed for use on glass lined reactors and other tanks where only glass is allowed in contact with the product.

JET SPRAY RING

The CANTY Jet Spray Ring generates a high pressure vortex rinsing action to remove tough deposits from sight glasses, lights, and vision systems.

F700 SERIES FLANGED SIGHT FLOWS

CANTY F700 series flanged sight flows have been engineered to meet all your process and piping needs. Our sight flows have been designed to meet strict ASME code requirements. CANTY hydrotests all units to 150% of the maximum rated pressure and can provide certification of material and testing if required, typical of ASME code requirements for process vessels.

QUICKFILL VIEW PORT APPLICATIONS SHEET OVERVIEW

The Canty QuickPort™ is a patented, safe, quick opening closure for process vessels. Originally used in the offshore diving industry as a transfer lock on decompression chambers. QuickPorts™ are used with no additional interlock by various non-industrial personnel in applications where any operational failure would be fatal.

S100 SERIES THREADED/WELDED SIGHT FLOWS

CANTY S100 series threaded/welded sight flows have been engineered to meet all your process and piping needs. Our Sight flows have been designed to meet strict ASME code requirements. CANTY hydro-tests all units to 150% of the maximum rated pressure and can provide certification of material and testing if required, typical of ASME code requirements for process vessels.

QUICKPORT™ CLOSURE/QUICKVIEW PORT™

The QuickPort™ closure provides a safe, easy, fast way to gain access to a pressure or vacuum vessel. Each QuickPort™ features a sliding door or Fuseview™ that opens laterally to provide full port access. The closure consists of a pad and a retaining flange held apart by spacers, a floating seal ring, and a door or window.

LIGHTS / SIGHT GLASSES / QUICKPORTS
PROCESS CAMERAS / SURVEILLANCE CAMERAS
CANTY Camera & Light Vision Systems are a patented design to view and illuminate the inside of a pressure or process vessel through a single connection. There is no need for multiple ports! CANTY can supply an integrally mounted camera and light (optional) in flanged, sanitary or NPT threaded process connections. CANTY fused glass technology provides a safe, high pressure, hermetic fused glass barrier between the process and the camera electronics.

EXPLOSION PROOF PAN & TILT CAMERA SYSTEM

Canty pan & tilt systems have been designed for use in hazardous areas in accordance with explosion proof, and flame proof requirements. · Class I, Div. 1, Groups B, C & D · Class II, Div. 1, Groups E, F & G, & NEMA 4 areas · EEx d IIC T6, IP66

PROCESS CAMERAS

View and illuminate inside a pressure or process vessel through a single connection. Integrally mounted camera and lighting system (optional) in a connection as small as a 2” NPT.

SURVEILLANCE CAMERAS

Features:

• Weather proof & explosion proof housings.

• Designed for harsh industrial environments

• Spray ring to keep lens clean

PROCESS CAMERAS / SURVEILLANCE CAMERAS
FOAM & LEVEL CONTROL
The CANTY non-contact Ethernet camera mounted on top of the vessel can monitor for level and foam. It can output 4-20mA or OPC to a PLC or DCS for complete control. The control room will have a monitor to view the whole process and provide visual verification.

NON-CONTACT LEVEL & FOAM CONTROL

Features:

  • Visual Verification
  • Foam Control
  • Verify Empty

 

FOAM & LEVEL CONTROL
CENTRIFUGE CONTROL
A camera light combination system is mounted to the centrifuge using the CANTY angled mounting plate. This allows for continuous monitoring from the control room, of initial product filling, the various washing and spinning cycles, and product discharge, therefore enabling greater operator control and efficient identification of any process issues.

CENTRIFUGE CAMERA CONTROL

Features:

• Cake thickness

• Color line control

• Wash optimization

CENTRIFUGE CONTROL
FILTER DRYER / NUTSCHE FILTER
The latest in imaging camera technology, combined with high intensity LED lighting, is mounted to your filter dryer vessel to provide an unrivalled remote view from the control room into your process.

FILTER DRYER CONTROL SYSTEM

Features:

• Avoid cracked cake surface

• Optimize washing cycles

• Visual verification

HYL 52 SANITARY LED LIGHTING SYSTEM

Features:

• LED Brightest Vessel Light
• 5yr maintenance-free
• No need for extra sight glass

PUREVIEW SANITARY SIGHT GLASS / LED LIGHTING SYSTEM

Features:

• Eliminates need for extra sight glass
• LED 5yr maintenance-free
• Safest sight glass in the world

FILTER DRYER / NUTSCHE FILTER
SPRAY DRYER
Monitoring the entire spray drying process will yield high production results.  To start by monitoring the turbidity of the liquid going into the dryer will help decrease buildup on the nozzle or imperfections.  Using the CANTY light and FuseView will assist on looking into the actual dryer.  The CANTY camera and light combo can be used to control and monitor the angle of which the spray comes out of the nozzle.  Finally, at the end the SolidSizer  with color spec can make sure the particle size is correct and no impurities are forming online.

Fuseview™ Sanitary Sight Glass

Features:

• Safest sight glass in the world

• Unlike competitors no cracks

• Largest view in the industry

PUREVIEW SANITARY SIGHT GLASS / LED LIGHTING SYSTEM

Features:

• Eliminates need for extra sight glass
• LED 5yr maintenance-free
• Safest sight glass in the world

SPRAY DRYER MONITORING SYSTEM

Feautres:

  • Spray Angle Control
  • Build Up Monitoring
  • Visual Verification

HYL 52 SANITARY LED LIGHTING SYSTEM

Features:

• LED Brightest Vessel Light
• 5yr maintenance-free
• No need for extra sight glass

LAB – SOLIDSIZER

Features:

• Correlates to sieve results within 2%

• 2D particle analysis

• 2 min analysis – non destructive

SOLIDSIZER™ WITH COLOR ANALYSIS

Features:

• 10 um – 2,400 um particle size
• Detects color defects in product
• Replaces sieves

INFLOW™ TURBIDITY MEASUREMENT SYSTEM

Features:

• In-line real time analysis
• Differentiate between particles & gas
• Visual verification

LAB TRUFLOW PARTICLE SIZING SYSTEM

Features:

• .7 um – 680 um particle size analysis
• 2D shape analysis
• Real time with visual verification

PHARMAFLOW PARTICLE SIZING SYSTEM

Features:

• 2D particle size, shape and distribution
• Small sample size analysis down to 5mL
• Syringe pump for easy sample circulation

SPRAY DRYER
PHASE SPLIT / INTERFACE / REFLUX CONTROL
Monitor phase split in batch mode on organic droplets for increased product recovery. As the droplets appear the system warns of organic phase and the upcoming emulsion. The amount of early droplets and their retraction time will indicate the completeness of the separation. Once the split is identified and stopped, the operator has a visual verification from the video monitor. The color can then be analyzed to ensure there is no inversion.

INTERFACE CONTROL

Features:

• Continuous or batch monitoring

• Output 4-20mA or OPC every second

• Visual verification

PHASE SPLIT

Features:

• Real-time monitoring 30 frames/sec

• Output 4-20mA or OPC

• Visual verification

PHASE SPLIT / INTERFACE / REFLUX CONTROL
ETHYLENE FURNACE
The single greatest cause of component failure in Ethylene Furnaces is overheating tubes, which can lead to tube rupture, and possible escape of the feed stock into the firebox area of the furnace, which not only is a process issue, but also a safety issue. The CANTY Ultratemp™ is a vision-based camera system used with the CantyVision to monitor temperature of the tubes inside an ethylene furnace real-time and continuously.

ETHYLENE FURNACE – ULTRATEMP

Features:

• Temperature Control

• Real-Time Continuous Measurement

• 1 Camera for Multiple Tube Monitoring

ETHYLENE FURNACE
EXTRUDER CONTROL
The CANTY extruder vision system allows users to view inside the melt chamber of an extruder at pressures of 5000 psi and temperatures of 600 ºF (300 ºC). This provides a microscopic view of the polymer melt to detect gels, black specks and other impurities in the polymer stream. Strand break is easily detected.

INDUSTRIAL SOLIDSIZER™ PARTICLE ANALYSIS SYSTEM

10 um – 2,400 um Particle size analysis range.  This system is designed for on-line use to determine particle size, shape and distribution, thereby eliminating the need for sieve analysis.

LABPLUS SOLIDSIZER Particle Analysis System

The JM Canty LabPlus SolidSizer™ is a vision-based sensor used with the Canty Vector System image processor for dry particle size measurement in a laboratory environment.

PROCESS CAMERAS

View and illuminate inside a pressure or process vessel through a single connection. Integrally mounted camera and lighting system (optional) in a connection as small as a 2” NPT.

EXTRUDER CONTROL
SOLID PARTICLE SIZE / DEFECT DETECTION
Size and shape analysis of dry particles or pellets, is performed by the range of CANTY Solid Sizer equipment. The product to be analysed is fed into the system hopper, where the built in material handling system separates the particles into one even layer, and transports them into the analyzer's measurement zone.

INDUSTRIAL SOLIDSIZER™ PARTICLE ANALYSIS SYSTEM

10 um – 2,400 um Particle size analysis range.  This system is designed for on-line use to determine particle size, shape and distribution, thereby eliminating the need for sieve analysis.

LAB – SOLIDSIZER

Features:

• Correlates to sieve results within 2%

• 2D particle analysis

• 2 min analysis – non destructive

SOLIDSIZER™ TS SOLID PARTICLE ANALYSIS SYSTEM

10 um – 2,400 um Particle size analysis range.  This system is designed for lab use to determine color speck detection, particle size, shape and distribution for flat or needle shape particles.

3D ROCKSIZER PARTICLE ANALYSIS SYSTEM

50 um – 6,000 um Particle size analysis range.  This system is designed for lab & on-line use to determine particle size, shape and distribution, thereby eliminating the need for sieve analysis.

SOLIDSIZER™ WITH COLOR ANALYSIS

Features:

• 10 um – 2,400 um particle size
• Detects color defects in product
• Replaces sieves

SOLID PARTICLE SIZE / DEFECT DETECTION
LIQUID PARTICLE SIZING
The liquid slurry to be analysed passes through the analyzer flow cell, which incorporates a microscopic camera, and high intensity back lighting system. High resolution 2D images are captured and sent to CantyVision™ software for real-time analysis. Each particle is measured under a range of size and shape parameters including major axis, minor axis, area, perimeter, aspect ratio circularity and equivalent circular diameter, to provide a truly comprehensive particle characterization. The imaging principle allows for visual verification of any results, and aids the user in developing a greater understanding of their process or product.

LAB DILUTION PARTICLE SIZING SYSTEM

Unlike laser analysis which requires the dilution amount to be exact every time, the CANTY system requires a minimum dilution but no maximum dilution. This is demonstrated by the basin on top. It is achieved because visual measurement detects the particles unlike laser which detects light scattering.

LAB REACTOR PARTICLE SIZING SYSTEM

Features:

• Crystallization monitoring in lab
• Seed size / count / concentration
• .7 um – 680 um particle size analysis

LAB TRUFLOW PARTICLE SIZING SYSTEM

Features:

• .7 um – 680 um particle size analysis
• 2D shape analysis
• Real time with visual verification

CRYSTALSCOPE PAT PARTICLE SIZING SYSTEM

Features:

• In vessel measurement
• Seed control – .7 um -650 um
• Visual verification

IMMERSION PARTICLE SIZE MEASUREMENT SYSTEM

.7 um – 4800 um Particle size analysis range.  This system is designed to be submersed into the product for real time highly accurate process measurement.

INFLOW™ PARTICLE SIZING SYSTEM

.7 um – 4800 um Particle size analysis range for inline real time information.  This system is designed for inline use with varying pressures, temperatures, and pipe diameters.

INFLOW™ COLOR MEASUREMENT SYSTEM

Color analysis using a high resolution CCD/CMOS image sensor that detects color changes in fluids by measuring the transmittance of light. Using advanced software algorithms the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.

INFLOW™ PERCENT SOLIDS MEASUREMENT SYSTEM

Percent solids analysis using a high resolution CCD/CMOS image sensor that detects percent solids in fluids by measuring the transmittance of light. Using advanced software algorithms the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.

INFLOW™ TURBIDITY MEASUREMENT SYSTEM

Features:

• In-line real time analysis
• Differentiate between particles & gas
• Visual verification

EXPANDED POLYSTYRENE SIZING

Features:

• Particle size with real-time analysis

• 4-20mA or OPC output

• Visual verification

LIQUID PARTICLE SIZING
PAINTS & PIGMENTS
This unit covers the determination of particle size distribution and particle shape of paints and pigments by dynamic imaging methods. This method includes the reporting of particles 1 um in size and up to 300 um in size. Used by formulators and QC people in the dispersion of paint and pigments.

PAINT & PIGMENT PARTICLE SIZING SYSTEM

Features:

• Particle size and count of solids/water

• 1um – 300um in particle size analysis

• CCD/CMOS Based High-Speed Imaging Device

PAINTS & PIGMENTS
TOP