Products

Items will be sorted by their product type. (Example: Sight Glasses, Lights, Liquid Particle Sizing)

Showing 1–12 of 95 results

Hardware – Vector

CANTY Vector Control Modules (VCM’s) act as the brain of a camera system. Each VCM purchased comes loaded with CANTYVISION™ software used for both viewing and analysis on an embedded platform that is dedicated to that software. VCM’s can be ordered equipped to output data from the analysis performed via analog (4-20mA), Modbus TCP/IP, or OPC. Depending on model and application, VCM’s can support up to 6 CANTY cameras, allowing for analysis from multiple cameras to be performed in real time on one VCM. VCM’s have watchdog settings to protect and troubleshoot against any unforeseen issues and come with a built-in remote support tool to connect with CANTY Tech Support (network connection required for remote support). In the event of a power failure, VCM’s can be set up to automatically reboot as soon as power is resupplied and restart analysis without the need of a person to come back and start things up again. All VCM’s are shipped to require little to no work out-of-the-box to begin analysis on your process.

VECTOR CONTROL MODULE – RACK MOUNT MODEL

Features:

  • Supports up to 6 cameras
  • CANTYVISION Software pre-installed and configured to require little to no setup out-of-the-box
  • Built-in remote support tool (internet required)
  • Takes up 3U in a standard rack
  • Runs on 120/230VAC
  • Can support analog, digital, Modbus TCP/IP, and OPC outputs

VECTOR CONTROL MODULE – LTE MODEL

Features:

  • Supports 1 camera
  • CANTYVISION Software pre-installed and configured to require little to no setup out-of-the-box
  • Built-in remote support tool (internet required)
  • Fanless unit to operate in harsh industrial environments
  • Runs on 24VDC – can be customer supplied or Canty can provide power supply
  • Can support Modbus TCP/IP, and OPC outputs

VECTOR CONTROL MODULE – INDUSTRIAL HARDENED MODEL

Features:
  • Supports up to 6 cameras
  • CANTYVISION Software pre-installed and configured to require little to no setup out-of-the-box
  • Built-in remote support tool (internet required)
  • Fanless unit to operate in harsh industrial environments
  • Runs on 24VDC – can be customer supplied or Canty can provide power supply
  • Can support analog, digital, Modbus TCP/IP, and OPC outputs

NON-CONTACT LEVEL & FOAM CONTROL – PHARMACEUTICAL

Features:

  • Visual Verification
  • Foam Control
  • Verify Empty

 

Single Use

Single Use Applicatons

  • Level Monitoring
  • Foam Control
  • Turbidity
  • Particle Size Analysis

Fermentation

CANTY imaging systems have been involved in the control to improve yield of fermentation for several years. Measurement of cell size, concentration and viability in real time in batch and perfusion type fermentation is critical to the process yield. The measurement of foam allows operators independent control of anti-foam additions. The measurement of cell size, count, viability and concentration in the lab or at-line is accomplished by our imaging based system which can distinguish a cell form a gas bubbles and other trace particles.

Liquid Analysis / Turbidity / CIP

Liquid  analysis using a high resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.

Sub-Visible Particles

Features:

• Particle size / shape / count

• In-line and lab options

• Visual Verification