Time limit is exhausted. Please reload CAPTCHA.
Canty specializes in many TEMPERATURE applications in foundries and metal production. Some of these include flame control and metal temperature measurement above 750F.
Canty specializes in many PAT applications for the pharmacuetical and biotech industries. Some of these include nutsche filter control and crystallization.
Within the flotation tank, monitoring of the froth characteristics at the surface is highly critical in order optimize yield of the mineral. Canty provide a modular camera light combination unit to provide a remote continuous view and control by detection of froth bubble size, velocity and stability.
The CANTY extruder vision system allows users to view inside the melt chamber of an extruder at pressures of 5000 psi and temperatures of 600 ºF (300 ºC). This provides a microscopic view of the polymer melt to detect gels, black specks and other impurities in the polymer stream. Strand break is easily detected. The key to the system is the CANTY fused glass. This provides a true high pressure hermetic seal which is flush and allows the polymer to flow over it as opposed to the typical window which would be recessed and gasketed, which causes a vortex shedding, cold spot and eventual plugging. In addition the use of our relaying optical system we keep the electronics in a cool area while avoiding cooling the insertion lens system which needs to be keep at the same temperature as the polymer to avoid coating over of the lens. This advanced system and the CANTY imaging software allow for a reliable system that views the polymer steam and can be programmed to detect and count imperfections.