Wastewater

Showing all 8 results

DATA CENTER WATER CLEANLINESS

Data center water cleanliness is a critical operational and environmental issue centered on the intense water usage of cooling systems. These systems consume vast quantities of water—often potable water—for evaporative cooling, which requires high water quality to prevent scaling, corrosion, and biological growth. Real-time, continuous particle monitoring is a priority to identify and treat contamination early.

MORE INFO
THICKENER CLARIFIER

In order to analyze the performance of the thickener/ clarifier, CANTY provides a direct inline color, turbidity and percent solids analyzer, to analyze the fluid discharged from the clarification process, in order to determine if it is within specification. Combining CANTY’s imaging, fused glass and lighting technologies, the color of the liquid can be analyzed on a number of color scales (YUV, RGB, Lab), which can be taken as a direct measurement, or related to a specific NTU or FTU turbidity value. The image analysis software has the ability to filter out any air bubbles from the analysis, meaning only a true color / turbidity measurement is performed on the fluid. For immediate detection of any problems within the clarifier, CANTY supplies an immersion turbidity / color and percent solids analyzer that can be mounted at various immersion depths to monitor the fluid.

MORE INFO
OIL IN WATER & TSS

CANTY’s range of INFLOW™ analyzers combine the latest Gigabit Ethernet camera and microscopic optics technology, with our trademark fused glass, LED lighting systems, and CANTYVISION Intelligent Analysis™ software, to provide real time analysis (concentration & size) of Oil and Total Suspended Solids in Water.

Oil & TSS in Water Overview

MORE INFO
PRODUCED WATER

Vision technology, when applied correctly, can provide an insight to a process that cannot be gained otherwise. It’s used to monitor and analyze a wide range of multiphase mixtures such as oil and solids in produced water, solids and water in fuels and lube oils, percent solids in separation and filter break applications.

MORE INFO
INFLOW™ TSS / PERCENT SOLIDS MEASUREMENT SYSTEM

Percent Solids measurement is typically a ratio of the area of solid particles vs the background. As solid percentages increase this can also be done by comparing the ratio of light through an empty cell vs light through a cell with solid content. The analysis is frame by frame at a rate in excess of 30 frames per second, so data can be supplied in very short time intervals (seconds) and produce a steady trend line of percent solids readings vs time.

MORE INFO
INFLOW™ TURBIDITY MEASUREMENT SYSTEM

Turbidity analysis uses a high-resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms, the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.

MORE INFO
INLINE INFLOW™ MEASUREMENT SYSTEM

The CANTY Inflow™ analyzer is installed inline within a data center cooling loop, the analyzer is capable of detecting solid particles at the micron scale and above. When detected, the analyzer outputs signals corresponding to particle size, count, concentration, providing continuous visibility into cooling water quality without interrupting system operation.

MORE INFO
DIGESTERCAM™ CAMERA SYSTEM FOR WASTEWATER TREATMENT

J.M. Canty cameras are patented systems designed to illuminate and view inside digester tanks through a single connection. There is no need for multiple vessel ports. Canty supplies an integrally mounted camera and lighting system that allows for the digester to remain hermetically sealed, even when performing maintenance on the camera system. Canty fused glass isolates the digester from the camera system, making it ideal for biogas production. The Ethernet video output can be displayed on a computer in the comforts of a control room, or recorded on any DVR or hard drive. Various software capabilities are available to allow for control and alarm options.

MORE INFO

TOP