-
CELL ANALYSIS
The Cell Analysis system is able to determine the condition of a cell by its appearance. This enables real time analysis without having to employ additive reagents. The results are comparable to Trypan Blue assays. See detailed information in the Data Sheet, Application Brochure and presentations in the Product Documents tab below.
-
PHARMA INFLOW™ TURBIDITY MEASUREMENT SYSTEM
Turbidity analysis using a high resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.
-
MINI INFLOW
Canty Mini Inflow analyzers utilize the latest in visible-spectrum microscopic imaging technology. Canty’s Gigabit Ethernet cameras, microscopic lenses, trademark fused glass, LED cool lighting systems, and proprietary CANTYVISION Intelligent Analysis software combine to provide the very best in real time analysis of particle concentration & size and shape distributions.
-
SINGLE USE PARTICLE ANALYZER
The CANTY SINGLEFLOW™ has been engineered to analyze small volume samples for particle size, shape and concentration in single use systems. The SINGLEFLOW™ easily converts from a lab unit to allow for continuous sampling in-line using sanitary Tri-Clamp™ connections. It offers microscopic, non-destructive viewing and provides particle size analysis with two dimensional results when used in conjunction with the CantyVisionClient™ Software. The vision system, with integral lighting, features precision optics designed to enhance the image prior to display or analysis. The image sensor is a high resolution / high speed CCD camera coupled to a microscopic lens system. The system offers zoom and focus ability, variable lighting, and disposable lens packages. The SINGLEFLOW™ features single use windows as the flush product contact barrier which ensures laminar flow & eliminates pockets for potential product build-up. Sizing down to 0.7 micron is possible with the high magnification optics and high intensity light source. A variety of pharmaceutical process need to be monitored and analyzed real time. This allows engineers and operators to view inside the process and give real-time results with visual verification.
CELL ANALYSIS
-
FERMENTATION
Biopharmaceutical fermentation is a process used in the pharmaceutical industry to produce a wide range of drugs and other therapeutic substances by cultivating microorganisms or cells in a controlled environment. Canty imaging systems significantly enhance fermentation processes by providing detailed, real-time insights into the culture environment by measuring key parameters such as cell size, concentration, and viability directly during fermentation. The systems ensures accurate counts and size distributions down to 0.7 microns (or 0.3 microns with phase contrast), assess cell health, and monitor foam levels.
-
CELL ANALYSIS
The Cell Analysis system is able to determine the condition of a cell by its appearance. This enables real time analysis without having to employ additive reagents. The results are comparable to Trypan Blue assays. See detailed information in the Data Sheet, Application Brochure and presentations in the Product Documents tab below.
-
MINI INFLOW
Canty Mini Inflow analyzers utilize the latest in visible-spectrum microscopic imaging technology. Canty’s Gigabit Ethernet cameras, microscopic lenses, trademark fused glass, LED cool lighting systems, and proprietary CANTYVISION Intelligent Analysis software combine to provide the very best in real time analysis of particle concentration & size and shape distributions.
-
SINGLE USE PARTICLE ANALYZER
The CANTY SINGLEFLOW™ has been engineered to analyze small volume samples for particle size, shape and concentration in single use systems. The SINGLEFLOW™ easily converts from a lab unit to allow for continuous sampling in-line using sanitary Tri-Clamp™ connections. It offers microscopic, non-destructive viewing and provides particle size analysis with two dimensional results when used in conjunction with the CantyVisionClient™ Software. The vision system, with integral lighting, features precision optics designed to enhance the image prior to display or analysis. The image sensor is a high resolution / high speed CCD camera coupled to a microscopic lens system. The system offers zoom and focus ability, variable lighting, and disposable lens packages. The SINGLEFLOW™ features single use windows as the flush product contact barrier which ensures laminar flow & eliminates pockets for potential product build-up. Sizing down to 0.7 micron is possible with the high magnification optics and high intensity light source. A variety of pharmaceutical process need to be monitored and analyzed real time. This allows engineers and operators to view inside the process and give real-time results with visual verification.
-
BIOCAM™ SANITARY PROCESS CAMERA
The CANTY BioCam™ is uniquely qualified to view inside your fermenters and bioreactors and provides a continual control signal allowing the user to meter in antifoam. The BioCam™ is an Ethernet based imaging system which connects to the CANTY VCM™ image processor that determines the percentage of foam on the surface of the liquid. The foam control function allows for significant savings of antifoam, improves process performance in cell culture growth and eliminates the need for additional antifoam fluids in purification. The all in-one design is both compact and sanitary and unlike its predecessors requires no additional external power supply for operation. A built in heater eliminates condensation from forming on the glass and provides for a clear image at all times. Coupled with CantyVision™ software, the BioCam™ can be used for full control via OPC or 4-20mA.
-
PHARMA INFLOW™ TURBIDITY MEASUREMENT SYSTEM
Turbidity analysis using a high resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.
-
PROCAM™ SANITARY PROCESS CAMERA
The CANTY ProCam™ is a process camera engineered and designed for sanitary applications. The ProCam™ combines the latest in LED lighting with Ethernet camera technology in a streamlined package.
-
S.U.BIOCAM™ SANITARY PROCESS CAMERA
The CANTY S.U.BioCam™ is a process camera engineered and designed for sanitary applications. The S.U.BioCam™ combines the latest in LED lighting with Ethernet camera technology in a streamlined package. The camera utilizes built-in strobe LED light that has been optimized to run efficiently as to not obstruct photosensitive processes. Easy change disposable front caps for each process. Coupled with CantyVision™ software, the S.U.BioCam™ can be used for full control via OPC or 4-20mA.
-
LABCAM™ LAB GLASS VESSEL CAMERA
The CANTY LabCam™ is uniquely qualified to view inside your glass lab fermenters and bioreactors and provides a continual control signal allowing the user to meter in antifoam. The LabCam™ is an Ethernet based imaging system which connects to the CANTY VCM™ image processor that determines the percentage of foam on the surface of the liquid. The foam control function allows for significant savings of antifoam, improves process performance in cell culture growth and eliminates the need for additional antifoam fluids in purification.
- Non-Contact foam & level monitoring and control
- Able to use on any size Bench-Top Bioreactor
- Correlates to markings / ruler on side of vessel
- Able to record continuous video feed or batches
- Remote viewing allows for vessel to be run dark
- Ease of use – multiple configurations and easily movable equipment
FERMENTATION
-
FILTER CONTROL
Filtration ensures that biologics—like therapeutic proteins, antibodies, and vaccines—are safe, pure, and effective. Each filter is chosen based on the size, charge, and chemistry of what needs to be removed or retained. Effective filtration processes, including careful filter selection, integrity testing, and monitoring for turbidity and filter breakthrough, are essential for ensuring the quality, safety, and regulatory compliance of pharmaceutical products. Filter breakthrough occurs when a filter fails to adequately remove particles or microorganisms from a solution, allowing them to pass through into the filtrate.
Turbidity can be an early indicator of filter breakthrough, particularly in-depth filters that are susceptible to turbidity breakthrough. Monitoring turbidity with CANTY’s high resolution CCD/CMOS image sensors can signal unwanted particles in the filtrate caused by the contamination. This real-time analysis can prevent wasted time and material, and aid in producing high-quality, safe, and effective products.
-
SINGLE USE PARTICLE ANALYZER
The CANTY SINGLEFLOW™ has been engineered to analyze small volume samples for particle size, shape and concentration in single use systems. The SINGLEFLOW™ easily converts from a lab unit to allow for continuous sampling in-line using sanitary Tri-Clamp™ connections. It offers microscopic, non-destructive viewing and provides particle size analysis with two dimensional results when used in conjunction with the CantyVisionClient™ Software. The vision system, with integral lighting, features precision optics designed to enhance the image prior to display or analysis. The image sensor is a high resolution / high speed CCD camera coupled to a microscopic lens system. The system offers zoom and focus ability, variable lighting, and disposable lens packages. The SINGLEFLOW™ features single use windows as the flush product contact barrier which ensures laminar flow & eliminates pockets for potential product build-up. Sizing down to 0.7 micron is possible with the high magnification optics and high intensity light source. A variety of pharmaceutical process need to be monitored and analyzed real time. This allows engineers and operators to view inside the process and give real-time results with visual verification.
-
INFLOW™ TURBIDITY MEASUREMENT SYSTEM
Turbidity analysis using a high resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.
FILTER CONTROL
-
S.U.BIOCAM™ SANITARY PROCESS CAMERA
The CANTY S.U.BioCam™ is a process camera engineered and designed for sanitary applications. The S.U.BioCam™ combines the latest in LED lighting with Ethernet camera technology in a streamlined package. The camera utilizes built-in strobe LED light that has been optimized to run efficiently as to not obstruct photosensitive processes. Easy change disposable front caps for each process. Coupled with CantyVision™ software, the S.U.BioCam™ can be used for full control via OPC or 4-20mA.
-
BIOCAM™ SANITARY PROCESS CAMERA
The CANTY BioCam™ is uniquely qualified to view inside your fermenters and bioreactors and provides a continual control signal allowing the user to meter in antifoam. The BioCam™ is an Ethernet based imaging system which connects to the CANTY VCM™ image processor that determines the percentage of foam on the surface of the liquid. The foam control function allows for significant savings of antifoam, improves process performance in cell culture growth and eliminates the need for additional antifoam fluids in purification. The all in-one design is both compact and sanitary and unlike its predecessors requires no additional external power supply for operation. A built in heater eliminates condensation from forming on the glass and provides for a clear image at all times. Coupled with CantyVision™ software, the BioCam™ can be used for full control via OPC or 4-20mA.
-
LABCAM™ LAB GLASS VESSEL CAMERA
The CANTY LabCam™ is uniquely qualified to view inside your glass lab fermenters and bioreactors and provides a continual control signal allowing the user to meter in antifoam. The LabCam™ is an Ethernet based imaging system which connects to the CANTY VCM™ image processor that determines the percentage of foam on the surface of the liquid. The foam control function allows for significant savings of antifoam, improves process performance in cell culture growth and eliminates the need for additional antifoam fluids in purification.
- Non-Contact foam & level monitoring and control
- Able to use on any size Bench-Top Bioreactor
- Correlates to markings / ruler on side of vessel
- Able to record continuous video feed or batches
- Remote viewing allows for vessel to be run dark
- Ease of use – multiple configurations and easily movable equipment
-
PROCAM™ SANITARY PROCESS CAMERA
The CANTY ProCam™ is a process camera engineered and designed for sanitary applications. The ProCam™ combines the latest in LED lighting with Ethernet camera technology in a streamlined package.
FOAM & LEVEL DETECTION
-
LIQUID ANALYSIS / TURBIDITY / CIP
The CANTY liquid analysis units use cameras to detect turbidity, CIP, and other desired process parameters. Liquid analysis using a high resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.
-
HYL 52 SANITARY LED LIGHTING SYSTEM
**New LED Lighting Systems** The HYL 52 LED lighting system is designed to illuminate bio reactors, fermentors and sanitary vessels. The HYL 52 light is a fused glass light which provides a high intensity, cold light source to allow the process to be viewed under a true white light (5000° K color temperature) while adding no heat to the process, which would cause product bake-on. The HYL 52 LED lighting package provides a compact, cost effective, maintenance free lighting system to meet all of your sanitary process needs. No more changing bulbs!
TURBIDITY / LIQUID ANALYSIS / CIP
-
MINI INFLOW
Canty Mini Inflow analyzers utilize the latest in visible-spectrum microscopic imaging technology. Canty’s Gigabit Ethernet cameras, microscopic lenses, trademark fused glass, LED cool lighting systems, and proprietary CANTYVISION Intelligent Analysis software combine to provide the very best in real time analysis of particle concentration & size and shape distributions.
PARTICLE ANALYSIS
-
WFI – WATER FOR INJECTION
In Water for Injection (WFI) or Sterile Water applications, it is vital to measure and quantify the amount of foreign particles such as solids, rouge, droplets, or biofilm in a given volume to ensure the product meets certain purification standards. USP 788 / 1788 is the accepted set of guidelines for testing and concentration limits for particulate matter in injectables.
The CANTY InFlow™ analyzer utilizes dynamic imaging technology that measures the solids, droplets, gas, and any foreign materials, passing through an inline flow cell. Analyzing these particles continuously produces particle count and concentration data which can better inform decisions for downstream purification or upstream process control, as well as ensuring guideline compliance.
-
PORTABLE INFLOW OIL IN WATER/WATER IN OIL ANALYZER
The Portable InFlow for OIW/WIO analysis is a rugged analyzer meant for the extreme environments of the petroleum exploration industry. It is a dual analyzer handling the detection of oil in water, or water in oil, depending on the application. It can be quickly installed to take process fluids off line through sampling valves and provide analysis results. The system is easily flushed clean.