Liquid Particle Size Analyzers

Showing 1–9 of 16 results

OIL IN WATER / WATER IN OIL – TRANSPORTABLE INFLOW (ATEX IECEx)

The Transportable INFLOW™ is designed for multi point site surveys, and testing or trouble shooting of any oilfield separation systems. It combines the latest Gigabit Ethernet camera and microscopic optics technology, with CANTY’s trademark fused glass, LED lighting systems, and CANTYVISION Intelligent Analysis™ software, to provide real time analysis (concentration & size) of Oil and Total Suspended Solids in Water.

MORE INFO
WEATHERPROOF TRANSPORTABLE INFLOW

The Canty INFLOW™ has been engineered with the latest Ethernet technology, CANTY fused glass, strobed LED lighting, and Canty Vision™ software to provide real time particle size, count, and shape analysis. The Transportable INFLOW™ central pivot point allows the analyzer to be rotated 90 degrees from its horizontal operating position to a vertical position for a more compact configuration used during transportation and storage. The trolley design also allows the entire system to be laid flat for even easier 4-wheel transport in suitable locations

MORE INFO
LIQUID ANALYSIS / TURBIDITY / CIP

The CANTY liquid analysis units use cameras to detect turbidity, CIP, and other desired process parameters. Liquid analysis using a high resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.

MORE INFO
LAB DILUTION PARTICLE SIZING SYSTEM

In addition to analysis of particle size and shape, the Canty Dilution system does not require a defined dilution to function properly as do laser systems. The software controls the dilution and provides sufficient, minimum diluent volume based on particle density per image. This avoids error due to touching particles. There are no counter effects for excess dilution.

MORE INFO
INFLOW™ COLOR MEASUREMENT SYSTEM

Canty InFlow technology images the fluid to capture color and particle size, shape and distribution if desired. Systems have a fused glass-to-metal, smooth interface with the process which enables use in high temperature and pressure environments, and minimizes maintenance of the interface in extreme environments.

MORE INFO
INFLOW™ TSS / PERCENT SOLIDS MEASUREMENT SYSTEM

Percent Solids measurement is typically a ratio of the area of solid particles vs the background. As solid percentages increase this can also be done by comparing the ratio of light through an empty cell vs light through a cell with solid content. The analysis is frame by frame at a rate in excess of 30 frames per second, so data can be supplied in very short time intervals (seconds) and produce a steady trend line of percent solids readings vs time.

MORE INFO
INFLOW™ PARTICLE SIZING SYSTEM

.7 um – 4800 um Particle size analysis range for inline real time information. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.

MORE INFO
INFLOW™ TURBIDITY MEASUREMENT SYSTEM

Turbidity analysis uses a high-resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms, the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.

MORE INFO
INLINE INFLOW™ MEASUREMENT SYSTEM

The CANTY Inflow™ analyzer is installed inline within a data center cooling loop, the analyzer is capable of detecting solid particles at the micron scale and above. When detected, the analyzer outputs signals corresponding to particle size, count, concentration, providing continuous visibility into cooling water quality without interrupting system operation.

MORE INFO

1
2

TOP