Metal Production

Showing 1–9 of 14 results

Particle Size and Shape Analysis (PSSA)

Particle sizing is a critical measurement for products or processes in almost any industry. As the importance of accurate and repeatable particle size measurements has grown, so too has the need to understand and measure particle shape. CANTY manufactures vision-based particle analyzers that are used globally. As the leader in particle size analysis for both lab and online systems, CANTY has a variety of products to measure PSSA in virtually any application.

MORE INFO
SHOT PEENING

Shot peening is the process of strengthening a material by inducing a compressive stress across the surface. The size and shape of the shot is expected to be uniform; however, there is typically some variance from this ideal. Characterizing and controlling particle size and shape distributions of shot media are fundamental to ensuring the success of the peening process. CANTY’s technical advances in dynamic imaging of particulate matter have enabled routine sampling and analysis of particle size and shape distributions. CANTY’s dynamic imaging is far supeior to to conventional “manual” measurement techniques.

MORE INFO
VECTOR CONTROL MODULE (VCM)

Vector Control Modules (VCM’s) serve as image processors for any of CANTY’s applications requiring analysis. These units are built as a turnkey solution to ensure the most convenient and simple startup for a camera system. VCM’s can power camera systems using power over Ethernet (POE) and come pre-loaded with application specific software to best serve your needs. With three different families of models, CANTY provides a variety of VCM’s to fit the needs of your installation. See our product brochure for additional information!

MORE INFO
REBAR / ROUND BAR LENGTH

Using image analysis CANTY can track the position of rebar or round bar with accuracy to within 1/2”. A tracking tool is displayed on the operator screen image at all times, to allow the user to visually verify what point is being tracked by the software. Control outputs are available to the DCS via OPC, 4-20mA and Modbus TCP/IP.

MORE INFO
HIGH TEMPERATURE SURVEILLANCE CAMERA

Canty High Temperature Surveillance Cameras are ideal for surveillance applications providing visual inspection and verification functions in extreme environments.

MORE INFO
TEMPERATURE MEASUREMENT

CANTY manufactures high temperature camera systems that are used to measure the temperature of materials 1,000°F and higher. In this temperature range, most materials emit light in the visible spectrum due to blackbody radiation that is able to be measured to determine temperature on a visible spectrum imaging system. This allows Canty to measure temperature in applications including tube metal, refractory, metal sheets/slabs, etc…

MORE INFO
FURNACE MONITORING

CANTY manufactures embedded camera systems that can provide a view into furnaces operating at temperatures up to 3000°F. These camera systems are used for a variety of applications including but not limited to view-only, temperature measurements, level measurements, position tracking, etc… Various camera systems are available for different types of installations.

MORE INFO
HOT RAIL LENGTH

Canty specializes in monitoring HOT RAIL LENGTH. Using an Ethernet CCD camera, the rail length, thickness and temperature can all be monitored real time from one device.

MORE INFO
SLAG MONITORING

CANTY manufactures high temperature camera systems that are used to monitor slag inside of furnaces. When slag is present in the image, the camera system sends signals to a DCS to alarm so that the slag can be monitored/removed.

MORE INFO

1
2

TOP