Process Cameras
Showing 1–12 of 34 results
BIOCAM™ Sanitary Process Camera
The CANTY BioCam™ is uniquely qualified to view inside your fermentors and bioreactors and provides a continual control signal allowing the user to meter in antifoam. The BioCam™ is an Ethernet based imaging system which connects to the CANTY VCM™ image processor that determines the percentage of foam on the surface of the liquid. The foam control function allows for significant savings of antifoam, improves process performance in cell culture growth and eliminates the need for additional antifoam fluids in purification.
Features:
• Foam detection
• Level control
• Single use options
CANTYNET PAN/TILT/ZOOM ETHERNET CONTROL MODULE
The CantyNet™ Pan/Tilt/Zoom Ethernet Control Module allows the user to control a Canty Pan/Tilt/Zoom camera using a single Ethernet cable via 10/100 Mbps or optional fiber network.
DIRECT INSERTION CAMERA
The camera is placed within the insertion tube reducing lens length and reducing loss of image quality. The increase quality is ideal for applications that need very high picture quality and that need insertions up to 36” (914mm) in length.
EXPLOSION PROOF PAN & TILT CAMERA SYSTEM
Canty pan & tilt systems have been designed for use in hazardous areas in accordance with explosion proof, and flame proof requirements. · Class I, Div. 1, Groups B, C & D · Class II, Div. 1, Groups E, F & G, & NEMA 4 areas · EEx d IIC T6, IP66
EXTREMETEMP™ FURNACE CAMERAS
Canty High Temperature Cameras are ideal for demanding applications involving visual inspection or verification in extreme temperature environments above 2500 F.
FIBER GLASS PULL RATE
Features:
• Glass Pull Rate
• Glass Temperature & Strand Width
• Glass Velocity
FILTER DRYER CONTROL SYSTEM
Features:
• Avoid cracked cake surface
• Optimize washing cycles
• Visual verification
FLOAT GLASS WIDTH MEASUREMENTS SYSTEM
Features:
• Measure Glass Width
• No cooling air required. Air is used for cleaning only!
• .001″ Accuracy
FROTH CONTROL SYSTEMS
An Ethernet camera is used to provide the measurement image to a customer supplied PC. The image from each camera is dynamically analyzed for bubble size, froth velocity and stability. CantyVision™ software is included with each camera. 4-20mA or OPC output to a PLC or DCS for complete automated control.