Products

Showing 19–27 of 95 results

HIGH TEMPERATURE SURVEILLANCE CAMERA

Canty High Temperature Surveillance Cameras are ideal for surveillance applications providing visual inspection and verification functions in extreme environments.

MORE INFO
SHORT LOOP SAMPLER – (JET FUEL) ANALYZER

The SHORT LOOP SAMPLER™ JET FUEL Analyzer combining sampling point and the INFLOW™ Process Particle Analyzer, provides real time concentration and particle size analysis. The SHORT LOOP SAMPLER™ allows operators and skid manufacturers to test multiple point in their line using only one analyzer and verify the results by using the sample point to verify reading in the lab. Models measure 0.7 micron – 20,000 micron particles under process conditions. By continuously measuring the fuel (WATER / SOLIDS / GAS) independently concentration and size is output 30 frames a second. This allows the user to see the impact of any change to the process system. By using a vision based system CANTY can easily detect all phases and separate them to give PPM/PPB distribution as well as SIZE distribution of all particulates. The system is designed to continuously sample from the center of the process stream and input the entire sample back into the stream so there is no loss of product when analyzing for concentration or particle size.

MORE INFO
PHARMA INFLOW™ TURBIDITY MEASUREMENT SYSTEM

Turbidity analysis using a high resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.

MORE INFO
BUBBLE CHAMBER

When a subatomic particle enters a vessel filled with superheated transparent liquid, it collides with a nucleus in the fluid. That collision releases additional particles, which vaporize the liquid along their paths and leave behind visible bubble tracks. By examining the pattern and behavior of these tracks, the types of particles produced in the collision can be identified.

CANTY has designed and engineered a high-pressure chamber for the superheated liquid, along with the camera and light to acquire images of the tracks. Specialized software is then used on these images to determine the physics of these particle collisions.

MORE INFO
TRI-CLAMP® FUSEVIEW™ SIGHT GLASS

Canty Fuseview™ sight glasses have been engineered to meet all your process and safety needs. Fuseview™ Tri-clamps® are a fused sight glass providing one-piece construction with no additional gaskets or torquing required. All standard Tri-clamp® Fuseviews™ were designed and tested to ensure the safest product available.

MORE INFO
TRI-CLAMP® FUSEVIEW™ SIGHT GLASS WITH HANDLE

Canty Fuseview™ sight glasses have been engineered to meet all your process and safety needs. Fuseview™ Tri-clamps® are a fused sight glass providing one-piece construction with no additional gaskets or torquing required. All standard Tri-clamp® Fuseviews™ were designed and tested to ensure the safest product available. With a convenient handle, the sight glass can easily be removed for maintenance.

MORE INFO
SHORT LOOP SAMPLER – (OIL IN WATER / WATER IN OIL) ANALYZER

The SHORT LOOP SAMPLER™ combines a sampling point with the INFLOW™ Particle Analyzer to deliver real-time concentration and particle size analysis of oil, water, sand, and gas. It enables operators to test multiple points with one analyzer, verify results in the lab, and continuously measure particles from 0.7 to 20,000 microns at 30 frames per second. Designed to sample from the process stream without product loss, it provides accurate PPM/PPB and size distribution for refining and drilling optimization.

Min Fluid Velocity: 3 ft/s (If lower consult factory)

Max Fluid Velocity: 15 ft/s

MORE INFO
FILTER DRYER / NUTSCHE

Stop washing product away! Monitoring the entire filter drying process will yield higher production results. Using the CANTY light and FuseView will assist operators looking into the dryer by using the brightest net light output and the largest view in the industry. The CANTY camera and light combo can be used to control and monitor level control and cake detection. By using the CANTY system it will eliminate over drying of the cake.

MORE INFO
FUEL / LUBE OIL PARTICLE & WATER ANALYZER

Particles in lubricating and hydraulic oils are detrimental as they increase wear, clog filters, and accelerate oil degradation. Particle analysis assesses the capability of an online filtration system to clean the oil, and determines if off-line re-circulation filtration is required to clean the fluid, or whether a complete fluid change out is necessary. A high level of wear particles within the fluid is indicative of an impending component failure. Predictive maintenance by periodic lubrication oil analysis can be used to predict and prevent such failures.

MORE INFO

1
2
3
4
5
6

TOP