PARTICLE SIZER

Showing 1–9 of 12 results

PAINT & PIGMENT PARTICLE SIZING SYSTEM

Relevant ASTM standards:
Analysis per ASTM Test Method D8090 for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods.

This unit covers the determination of particle size distribution and particle shape of paints and pigments by dynamic imaging methods. This method includes the reporting of particles 1 um in size and up to 300 um in size. Used by formulators and QC people in the dispersion of paint and pigments.

MORE INFO
LAB DILUTION PARTICLE SIZING SYSTEM

In addition to analysis of particle size and shape, the Canty Dilution system does not require a defined dilution to function properly as do laser systems. The software controls the dilution and provides sufficient, minimum diluent volume based on particle density per image. This avoids error due to touching particles. There are no counter effects for excess dilution.

MORE INFO
CELL ANALYSIS

The Cell Analysis system is able to determine the condition of a cell by its appearance. This enables real time analysis without having to employ additive reagents. The results are comparable to Trypan Blue assays. See detailed information in the Data Sheet, Application Brochure and presentations in the Product Documents tab below.

MORE INFO
INFLOW™ COLOR MEASUREMENT SYSTEM

Canty InFlow technology images the fluid to capture color and particle size, shape and distribution if desired. Systems have a fused glass-to-metal, smooth interface with the process which enables use in high temperature and pressure environments, and minimizes maintenance of the interface in extreme environments.

MORE INFO
INFLOW™ TSS / PERCENT SOLIDS MEASUREMENT SYSTEM

Percent Solids measurement is typically a ratio of the area of solid particles vs the background. As solid percentages increase this can also be done by comparing the ratio of light through an empty cell vs light through a cell with solid content. The analysis is frame by frame at a rate in excess of 30 frames per second, so data can be supplied in very short time intervals (seconds) and produce a steady trend line of percent solids readings vs time.

MORE INFO
INFLOW™ TURBIDITY MEASUREMENT SYSTEM

Turbidity analysis uses a high-resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms, the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.

MORE INFO
INLINE INFLOW™ MEASUREMENT SYSTEM

The CANTY Inflow™ analyzer is installed inline within a data center cooling loop, the analyzer is capable of detecting solid particles at the micron scale and above. When detected, the analyzer outputs signals corresponding to particle size, count, concentration, providing continuous visibility into cooling water quality without interrupting system operation.

MORE INFO
CRYSTALSCOPE PAT PARTICLE SIZING SYSTEM

.7 um – 680 um Particle size analysis range in a reactor for monitoring crystal size in real time from nucleation to full growth. 2D results with no need for multiple probes

MORE INFO
MACROFLOW PARTICLE SIZING SYSTEM

10 um – 2,400 um Particle size analysis range in a linear flow or recirculating loop. This system is designed for lab use with varying pressures and temperatures.

MORE INFO

1
2

TOP