Showing all 2 results
The CantyVision™ software can identify the differences and the customer can visually verify the readings. The Inflow™ can calibrated with ASTM D8049 or the customers current lab method to make for easy instillation in the field. By providing droplet size the JET FUEL companies will now know exactly how to separate the water or solids since the separation methods are mostly based on size. Video recording is an option for later analysis. In-line analysis make sure production samples are not skipped over due to lack of sample time available!
Using the ASTM D8049 method, the CANTY Inflow™ is a vision-based camera system used with the CANTY Vector System image processor for JET FUEL concentration and size measurement in a lab environment / at-line (Short Loop Sampler) / in-line process. The CantyVision™ Software accurately measures multiple aspects of the JET FUEL from water/ solids / gas independent of each other for accurate data. In comparison to a florescence monitor or laser unit, which measures only contamination level but can’t determine the difference of water / solids / gas.
JET FUEL – INFLOW
The CANTY Inflow™ is a vision-based camera system monitoring for water in jet fuel and particles in jet fuel in a lab environment / at-line / in-line process. The presence of these two physical contaminants is dangerous to aircraft fuel systems and engines, and compromises safety. The CantyVision™ Software accurately measures multiple aspects of the jet fuel from water / solids / gas independent of each other for accurate data. In comparison to a laser, which measures only one dimension and can’t identify the difference of water and solids in the stream, the CantyVision™ software can identify the differences. The customer can also visually verify the readings. Fuel contamination takes place mainly in transportation and storage. The current method of measuring jet fuel is the subjective visual inspection test. CANTY objectively takes the measurement and reports based on a two dimensional image. Color / HAZE / Solids / Water are all measured and continuously and objectively monitored. By knowing whether there is a water or solids problem this helps the operators identify how to fix the problem. The Inflow™ is an in-line analysis system to make sure production samples are not skipped over!