Showing all 4 results
Using image analysis CANTY can track the position of rebar with accuracy to within 1/2”. A tracking tool is displayed on the operator screen image at all times, to allow the user to visually verify what point is being tracked by the software. Control outputs are available to the DCS via OPC, 4-20mA and Modbus TCP/IP.
MOLTEN GLASS LEVEL – HIGHTEMP™ SURVEILLANCE CAMERA
The CANTY Molten Glass Level system consists of a high temperature surveillance camera, mounted to view the surface of the molten glass through an opening in the wall. On the wall directly opposite the camera, a reference point is created, often by simply removing a brick from the wall, or boring a hole though it. The position of the reflection of this reference point on the surface of the glass relative to the fixed mount camera, is directly related to the molten glass level. CantyVision™ software is configured to track the position of this reflection with accuracy to 0.001” (0.025mm). A cross-hair is displayed on the operator screen image at all times, to allow the user to visually verify what point is begin tracked by the software. Control outputs are available to the DCS via OPC, 4-20mA and Modbus TCP/IP.
FLOAT GLASS WIDTH MEASUREMENTS SYSTEM
Two high resolution GigE (gigabit ethernet vision) cameras enclosed in an IP67 temperature resistant full metal/jacketed housing cooled by either water or air. A unique orifice plate prevents debris from adhering to the lens, resulting in a clear view of the glass edge and ribbon at all times. Cameras come with a fully adjustable mounting system to allow for optimal camera positioning. Camera can be powered via PoE (power over ethernet) through a direct connection back to a Vector Control Module (embedded image processing system) with variable outputs for system control (analog, Modbus, OPC etc.)