Shop

Showing 109–117 of 255 results

TAILINGS MEASUREMENT

For monitoring of tailings outputted from the flotation tank, CANTY’s at-line real time liquid particle image analysis systems provide true size, shape and percent solids output providing the operators with the key characteristics of the tailings for optimum operational performance and disposal.

MORE INFO
CRUSHER

In order to monitor crusher performance, CANTY provides Industrial SolidSizer or 3D Rocksizer image analysis systems, which determine if the mining aggregates outputted from the crusher are the correct size and shape. The systems can be run at line through the use of a sweep sampler, or offline as laboratory instruments. In order to know the quantity produced from the crusher, it is important to have an accurate volume measurement. Traditionally, volume belt scales are used, but there can be significant time spent on maintenance of this equipment due to the nature of how the measurement is performed. The CANTY Volume Flow system is a non-contact visual measurement of the product area profile on the end of the conveyor. This area measurement can be combined with the velocity of the belt (separate measurement required) in the operators control system, to provide an accurate volume flow measurement.

MORE INFO
CHUTE PLUGGING

Chute plugging in mining is a significant operational and safety problem caused by the accumulation of bulk materials like ore or coal, leading to costly downtime, equipment damage, and accidents. CANTY’s vision system can prevent mining chute plugging by providing real-time, remote visual monitoring of material flow, allowing operators to identify blockages or hang-ups early.

MORE INFO
DATA CENTER WATER CLEANLINESS

Data center water cleanliness is a critical operational and environmental issue centered on the intense water usage of cooling systems. These systems consume vast quantities of water—often potable water—for evaporative cooling, which requires high water quality to prevent scaling, corrosion, and biological growth. Real-time, continuous particle monitoring is a priority to identify and treat contamination early.

MORE INFO
THICKENER CLARIFIER

In order to analyze the performance of the thickener/ clarifier, CANTY provides a direct inline color, turbidity and percent solids analyzer, to analyze the fluid discharged from the clarification process, in order to determine if it is within specification. Combining CANTY’s imaging, fused glass and lighting technologies, the color of the liquid can be analyzed on a number of color scales (YUV, RGB, Lab), which can be taken as a direct measurement, or related to a specific NTU or FTU turbidity value. The image analysis software has the ability to filter out any air bubbles from the analysis, meaning only a true color / turbidity measurement is performed on the fluid. For immediate detection of any problems within the clarifier, CANTY supplies an immersion turbidity / color and percent solids analyzer that can be mounted at various immersion depths to monitor the fluid.

MORE INFO
FLOTATION TANK

Within the flotation tank, monitoring of the froth characteristics at the surface is highly critical in order optimize yield of the mineral. Canty provide a modular camera light combination unit to provide a remote continuous view and control by detection of froth bubble size, velocity and stability.

MORE INFO
MILLING & BLENDING

CANTY provides an at line real time slurry particle sizing system to determine the PSD and shape characteristics along with concentration of the mining slurry. CANTY’s range of image based particle analysis systems provide true size and shape characterization, with each particle measured under 13 size and shape parameters. This dynamic vision based method replaces and correlates to screen analysis along with giving the operator an unparalleled insight into the process.

MORE INFO
LIME KILN

A LIME KILN is used to produce quicklime by the calcination of limestone that is calcium carbonate. The rotary kiln that is used operates around 900°C-1000°C. This operation needs to be monitored and reported on to make sure the producers are making good usable product. If the product does not reach the required state to make the chemical reaction then is just stays as limestone. If the kiln over heats it will start to make unusable burnt product.

A key feature that must be maintained is the fire in which they are using to cause the calcination of the material. This can be achieved by monitoring the fire by its temperature. Another key item to monitor on the fire is its size and shape to make sure the kiln is having uniform heating. CANTYVISION can be used to monitor the temperature of the flame and also give visual verification of size. The rotation of the kiln plays a key role in making sure the product is distributed correctly and that the product is not creeping up the side walls too high or too low as that will affect the rate at which the limestone is heating up and ultimately affect the calcination process. CANTYVISION can be used to give visual verification of product. This will be a critical feature for the operator.

MORE INFO
HIGH TEMPERATURE CAMERAS
Designed for the extreme 3000ºF [1650ºC] max. temperature requirements of glass furnaces, the ExtremeTemp™ Glass Furnace Camera combines the a CANTY UltraTemp™ Camera with an Inconel sleeved high temperature refractory jacket. The assembly is inserted thru an opening in the fire brick, providing a remote view into the furnace.

3000ºF [1650ºC] max. rating – extreme temp furnace lens

High quality quartz optics • Auto electronic iris

Disposable, protective quartz shield

Non-blooming CCD or Ethernet cameras

Cooling air required
MORE INFO

10
11
12
13
14
15
16

TOP