-
CENTRIFUGE CAMERA CONTROL
A camera light combination system is mounted to the centrifuge using the CANTY angled mounting plate. This allows for continuous monitoring from the control room, of initial product filling, the various washing and spinning cycles, and product discharge, therefore enabling greater operator control and efficient identification of any process issues. In the control room, the Vector™ image processing computer will analyze this view and provide a 4-20mA or OPC output of fill level, filtering level, and a separate cake (solids) detection signal. The level control allows for consistent batching to the centrifuge. The cake detection 4-20mA or OPC output signal provides for immediate detection of solids, which prevent the cake from cracking. This means higher product yield due to fewer washes, and ultimately better product quality.
-
PUREVIEW SANITARY SIGHT GLASS / LED LIGHTING SYSTEM
CANTY fiber optic lighting systems have been designed to provide efficient, high output LED light in a cost effective package. CANTY uses only high quality, fiber optic light pipes to guide the light from our light source through a sight glass or process connection. The light is elliptically focused into the fiber optic light pipe and guided through the sight glass minimizing losses while maximizing your tank or vessel lighting!
-
Fuseview™ Sanitary Sight Glass
All CANTY sight glasses feature the Fuseview™ window. Our unique fused glass windows far exceed all conventional tempered glass windows in safety and performance. By fusing glass to metal, a high pressure, high safety, hermetic seal is formed. The fused glass Technology ensures safety with every Fuseview™. What’s more, our windows can easily be removed for cleaning. CANTY windows do not have to be discarded, as do traditional tempered glass windows. CANTY fused glass windows can be re-used again and again.
-
HYL 52 SANITARY LED LIGHTING SYSTEM
**New LED Lighting Systems** The HYL 52 LED lighting system is designed to illuminate bio reactors, fermentors and sanitary vessels. The HYL 52 light is a fused glass light which provides a high intensity, cold light source to allow the process to be viewed under a true white light (5000° K color temperature) while adding no heat to the process, which would cause product bake-on. The HYL 52 LED lighting package provides a compact, cost effective, maintenance free lighting system to meet all of your sanitary process needs. No more changing bulbs!
CENTRIFUGE
-
LAB REACTOR PARTICLE SIZING SYSTEM
Features:
• Crystallization monitoring in lab
• Seed size / count / concentration
• .7 um – 680 um particle size analysis
LAB CRYSTALLIZER - GLASS REACTOR
-
BIOCAM™ SANITARY PROCESS CAMERA
The CANTY BioCam™ is uniquely qualified to view inside your fermenters and bioreactors and provides a continual control signal allowing the user to meter in antifoam. The BioCam™ is an Ethernet based imaging system which connects to the CANTY VCM™ image processor that determines the percentage of foam on the surface of the liquid. The foam control function allows for significant savings of antifoam, improves process performance in cell culture growth and eliminates the need for additional antifoam fluids in purification. The all in-one design is both compact and sanitary and unlike its predecessors requires no additional external power supply for operation. A built in heater eliminates condensation from forming on the glass and provides for a clear image at all times. Coupled with CantyVision™ software, the BioCam™ can be used for full control via OPC or 4-20mA.
-
FILTER DRYER CONTROL SYSTEM
Features:
- Avoid cracked cake surface
- Optimize washing cycles
- Visual verification
-
PUREVIEW SANITARY SIGHT GLASS / LED LIGHTING SYSTEM
CANTY fiber optic lighting systems have been designed to provide efficient, high output LED light in a cost effective package. CANTY uses only high quality, fiber optic light pipes to guide the light from our light source through a sight glass or process connection. The light is elliptically focused into the fiber optic light pipe and guided through the sight glass minimizing losses while maximizing your tank or vessel lighting!
-
HYL 52 SANITARY LED LIGHTING SYSTEM
**New LED Lighting Systems** The HYL 52 LED lighting system is designed to illuminate bio reactors, fermentors and sanitary vessels. The HYL 52 light is a fused glass light which provides a high intensity, cold light source to allow the process to be viewed under a true white light (5000° K color temperature) while adding no heat to the process, which would cause product bake-on. The HYL 52 LED lighting package provides a compact, cost effective, maintenance free lighting system to meet all of your sanitary process needs. No more changing bulbs!
-
Fuseview™ Sanitary Sight Glass
All CANTY sight glasses feature the Fuseview™ window. Our unique fused glass windows far exceed all conventional tempered glass windows in safety and performance. By fusing glass to metal, a high pressure, high safety, hermetic seal is formed. The fused glass Technology ensures safety with every Fuseview™. What’s more, our windows can easily be removed for cleaning. CANTY windows do not have to be discarded, as do traditional tempered glass windows. CANTY fused glass windows can be re-used again and again.
FILTER DRYER / NUTSCHE
-
BIOCAM™ SANITARY PROCESS CAMERA
The CANTY BioCam™ is uniquely qualified to view inside your fermenters and bioreactors and provides a continual control signal allowing the user to meter in antifoam. The BioCam™ is an Ethernet based imaging system which connects to the CANTY VCM™ image processor that determines the percentage of foam on the surface of the liquid. The foam control function allows for significant savings of antifoam, improves process performance in cell culture growth and eliminates the need for additional antifoam fluids in purification. The all in-one design is both compact and sanitary and unlike its predecessors requires no additional external power supply for operation. A built in heater eliminates condensation from forming on the glass and provides for a clear image at all times. Coupled with CantyVision™ software, the BioCam™ can be used for full control via OPC or 4-20mA.
-
LABCAM™ LAB GLASS VESSEL CAMERA
The CANTY LabCam™ is uniquely qualified to view inside your glass lab fermenters and bioreactors and provides a continual control signal allowing the user to meter in antifoam. The LabCam™ is an Ethernet based imaging system which connects to the CANTY VCM™ image processor that determines the percentage of foam on the surface of the liquid. The foam control function allows for significant savings of antifoam, improves process performance in cell culture growth and eliminates the need for additional antifoam fluids in purification.
- Non-Contact foam & level monitoring and control
- Able to use on any size Bench-Top Bioreactor
- Correlates to markings / ruler on side of vessel
- Able to record continuous video feed or batches
- Remote viewing allows for vessel to be run dark
- Ease of use – multiple configurations and easily movable equipment
-
PROCESS CAMERA / LIGHT
View and illuminate inside a pressure or process vessel through a single connection. Integrally mounted camera and lighting system (optional) in a connection as small as a 2” NPT.
-
PROCAM™ SANITARY PROCESS CAMERA
The CANTY ProCam™ is a process camera engineered and designed for sanitary applications. The ProCam™ combines the latest in LED lighting with Ethernet camera technology in a streamlined package.
FOAM & LEVEL DETECTION
-
MINI INFLOW
Canty Mini Inflow analyzers utilize the latest in visible-spectrum microscopic imaging technology. Canty’s Gigabit Ethernet cameras, microscopic lenses, trademark fused glass, LED cool lighting systems, and proprietary CANTYVISION Intelligent Analysis software combine to provide the very best in real time analysis of particle concentration & size and shape distributions.
PARTICLE ANALYSIS
-
TRI-CLAMP® FUSEVIEW™ SIGHT GLASS
Canty Fuseview™ sight glasses have been engineered to meet all your process and safety needs. Fuseview™ Tri-clamps® are a fused sight glass providing one-piece construction with no additional gaskets or torquing required. All standard Tri-clamp® Fuseviews™ were designed and tested to ensure the safest product available.
-
SPRAY DRYING
CANTY Spray Dryer Monitoring Systems are vision based, industrial camera / light combinations used to view spray nozzle patterns in real time. This allows operators to see changes in the profile of the spray pattern, and detect clogging before it becomes a problem. Operators can easily view for product build-up before there is a chance for fire. This Vision System can be automated by the CANTY Vector™ Image Processor to measure the size and shape of the spray pattern profile. 4-2mA or OPC alarms can then be sent to the control system if nozzles clog or the spray pattern changes.
-
PUREVIEW SANITARY SIGHT GLASS / LED LIGHTING SYSTEM
CANTY fiber optic lighting systems have been designed to provide efficient, high output LED light in a cost effective package. CANTY uses only high quality, fiber optic light pipes to guide the light from our light source through a sight glass or process connection. The light is elliptically focused into the fiber optic light pipe and guided through the sight glass minimizing losses while maximizing your tank or vessel lighting!
-
PHARMA INFLOW™ TURBIDITY MEASUREMENT SYSTEM
Turbidity analysis using a high resolution CCD/CMOS image sensor that detects turbidity changes in fluids by measuring the transmittance of light. Using advanced software algorithms the system automatically removes gas bubbles from the analysis resulting in highly accurate and repeatable data outputs. This system is designed for inline use with varying pressures, temperatures, and pipe diameters.
-
SOLIDSIZER™ WITH COLOR ANALYSIS
10 um – 2,400 um Particle size analysis range. Finished sugar product is subjected to a series of quality control tests in order to determine if the sugar crystals are the correct size and shape, and also that the concentration of black specks / burned sugar crystals is within specification. CANTY’S range of image based particle analysis systems provide true size and shape characterization, with each particle measured under 13 size and shape parameters. CANTY’S imaging systems also offer the option of Black Speck detection within the sugar sample. The systems can be run at line through the use of a sweep sampler, or offline as laboratory instruments. This system provides direct correlation to traditional sieve analysis, but does so in a much shorter analysis time, with much less operator input required.
-
PHARMAFLOW PARTICLE SIZING SYSTEM
The Canty PHARMAFLOW™ has been engineered to analyze small volume samples for particle size, shape and concentration. The PHARMAFLOW™ easily converts from a lab unit to allow for continuous sampling in-line using sanitary Tri-Clamp™ connections. It offers microscopic, non-destructive viewing and provides particle size analysis with two dimensional results when used in conjunction with the CantyVisionClient™ Software. The vision system, with integral lighting, features precision optics designed to enhance the image prior to display or analysis. The image sensor is a high resolution / high speed CCD camera coupled to a microscopic lens system. The system offers zoom and focus ability, variable lighting, and multiple objective lens packages to cover a range of sizes. The PHARMAFLOW™ features the FUSEVIEW™ window as the flush product contact barrier which ensures laminar flow & eliminates pockets for potential product build-up. Sizing down to 0.7 micron is possible with the high magnification optics and high intensity light source. A variety of pumps can be used in conjunction with the system, including syringe style injection as well as peristaltic pumps.
-
LAB – SOLIDSIZER
The CANTY SolidSizer™ is a vision-based sensor used with the CANTY Vector System image processor for dry particle size measurement in a laboratory environment. The CantyVision™ Software accurately measures multiple aspects of the particles from area / perimeter / minor and major axis / etc. In comparison to a sieve which measures only minor axis the CantyVision™ software can correlate directly to a sieve so the customer does not have to change any QC documents. The SolidSizer™ can correlate within 2% of a sieve. A typical sieve analysis takes anywhere from 20-30 minutes including cleaning and setup for a 70-100 gram sample. On the SolidSizer™ that same sample takes less than 2 minutes. Also multiple screen distributions can be setup to accommodate multiple customers or areas in the process, hence eliminating the need for multiple runs on the same sand for different size distributions. After correlating to current methods of minor axis, customers find benefit in comparing minor axis to major axis and comparing shape factors. Reduce lab time and make sure production samples are not skipped over due to lack of sample time available!
-
LAB TRUFLOW PARTICLE SIZING SYSTEM
The TRUFLOW system is a versatile tool for research and analysis of fluid product. A wide range of options are available Including high pressure/temperature, multiple styles of illumination, several size ranges (starting at 0.7 micron) and Various environmental ratings for lab or process use (NEMA 4, Explosin/Flame proof).
-
HYL 52 SANITARY LED LIGHTING SYSTEM
**New LED Lighting Systems** The HYL 52 LED lighting system is designed to illuminate bio reactors, fermentors and sanitary vessels. The HYL 52 light is a fused glass light which provides a high intensity, cold light source to allow the process to be viewed under a true white light (5000° K color temperature) while adding no heat to the process, which would cause product bake-on. The HYL 52 LED lighting package provides a compact, cost effective, maintenance free lighting system to meet all of your sanitary process needs. No more changing bulbs!
SPRAY DRYER
-
LAB – SOLIDSIZER
The CANTY SolidSizer™ is a vision-based sensor used with the CANTY Vector System image processor for dry particle size measurement in a laboratory environment. The CantyVision™ Software accurately measures multiple aspects of the particles from area / perimeter / minor and major axis / etc. In comparison to a sieve which measures only minor axis the CantyVision™ software can correlate directly to a sieve so the customer does not have to change any QC documents. The SolidSizer™ can correlate within 2% of a sieve. A typical sieve analysis takes anywhere from 20-30 minutes including cleaning and setup for a 70-100 gram sample. On the SolidSizer™ that same sample takes less than 2 minutes. Also multiple screen distributions can be setup to accommodate multiple customers or areas in the process, hence eliminating the need for multiple runs on the same sand for different size distributions. After correlating to current methods of minor axis, customers find benefit in comparing minor axis to major axis and comparing shape factors. Reduce lab time and make sure production samples are not skipped over due to lack of sample time available!
VOLUME FLOW
-
SINGLE USE PARTICLE ANALYZER
The CANTY SINGLEFLOW™ has been engineered to analyze small volume samples for particle size, shape and concentration in single use systems. The SINGLEFLOW™ easily converts from a lab unit to allow for continuous sampling in-line using sanitary Tri-Clamp™ connections. It offers microscopic, non-destructive viewing and provides particle size analysis with two dimensional results when used in conjunction with the CantyVisionClient™ Software. The vision system, with integral lighting, features precision optics designed to enhance the image prior to display or analysis. The image sensor is a high resolution / high speed CCD camera coupled to a microscopic lens system. The system offers zoom and focus ability, variable lighting, and disposable lens packages. The SINGLEFLOW™ features single use windows as the flush product contact barrier which ensures laminar flow & eliminates pockets for potential product build-up. Sizing down to 0.7 micron is possible with the high magnification optics and high intensity light source. A variety of pharmaceutical process need to be monitored and analyzed real time. This allows engineers and operators to view inside the process and give real-time results with visual verification.
-
WFI – INFLOW™
The Canty Inflow™ is designed to be installed in-line to monitor WFI so the manufacture can have longer run times and can verify constant compliance with the USP. CANTY can output the particle concentration continuously so that if an upset does occur the operators are aware of it and take samples to the lab for further testing. What’s more, CANTY’s unique vision-based system allows for differentiation between particles and gas bubbles. Visual verification is provided and 4-20mA signals or OPC can be used to alarm to an upset condition.
-
WFI – WATER FOR INJECTION
In Water for Injection (WFI) or Sterile Water applications, it is vital to measure and quantify the amount of foreign particles such as solids, rouge, droplets, or biofilm in a given volume to ensure the product meets certain purification standards. USP 788 / 1788 is the accepted set of guidelines for testing and concentration limits for particulate matter in injectables.
The CANTY InFlow™ analyzer utilizes dynamic imaging technology that measures the solids, droplets, gas, and any foreign materials, passing through an inline flow cell. Analyzing these particles continuously produces particle count and concentration data which can better inform decisions for downstream purification or upstream process control, as well as ensuring guideline compliance.
-
BIOFILM
In pharmaceutical water systems, particularly WFI (Water for Injection) loops, biofilms pose a significant risk of contamination. Biofilms are essentially communities of microorganisms that attach to surfaces and create a protective matrix, making them difficult to remove and potentially leading to issues with product quality and safety. The CANTY INFLOW™ monitors water quality through particle analysis which is necessary to identify those microorganisms and address potential issues early on.
-
ROUGING
Rouging in WFI (Water for Injection) systems refers to the formation of reddish-brown to dark violet iron deposits on the interior surfaces of stainless steel equipment, particularly in pharmaceutical and biotech industries. This phenomenon is a type of corrosion and is primarily caused by the oxidation of iron in the stainless steel, especially in the presence of hot WFI (above 60°C). Rouge can detach from the surfaces and contaminate the WFI, potentially affecting the quality and safety of pharmaceutical products. The CANTY InFlow™ detects these particles in real time, quantifying the amount of rouge being generated, providing an objective measure of system performance.