SOLIDSIZER

Showing all 9 results

Particle Size and Shape Analysis (PSSA)

Particle sizing is a critical measurement for products or processes in almost any industry. As the importance of accurate and repeatable particle size measurements has grown, so too has the need to understand and measure particle shape. CANTY manufactures vision-based particle analyzers that are used globally. As the leader in particle size analysis for both lab and online systems, CANTY has a variety of products to measure PSSA in virtually any application.

MORE INFO
PARTICLE SIZE AND SHAPE ANALYSIS (PSSA) IN THE FOOD INDUSTRY

Particle size and shape analysis are crucial in food processing because they directly impact food quality, texture, and functionality. Understanding these parameters helps in optimizing manufacturing processes, controlling product quality, and ensuring customer satisfaction. CANTY manufactures vision-based particle analyzers that are used globally. As the leader in particle size analysis for both lab and online systems, CANTY has a variety of products to measure PSSA in food and beverage production.

MORE INFO
SHOT PEENING

Shot peening is the process of strengthening a material by inducing a compressive stress across the surface. The size and shape of the shot is expected to be uniform; however, there is typically some variance from this ideal geometry. Characterizing and controlling particle size and shape distributions of shot media are fundamental to ensuring the success of the peening process. CANTY’s technical advances in dynamic imaging of particulate matter have enabled routine sampling and analysis of particle size and shape distributions. CANTY’s dynamic imaging is far superior to conventional “manual” measurement techniques.

MORE INFO
SUGAR PARTICLE SIZE AND SHAPE ANALYSIS (PSSA)

Particle size and shape analysis are crucial in sugar processing as it directly impacts the quality, texture, and functionality of sugar. Understanding these parameters helps in optimizing manufacturing processes, controlling product quality, and ensuring customer satisfaction. CANTY manufactures vision-based particle analyzers that are used globally. As the leader in particle size analysis for both lab and online systems, CANTY has a variety of products to measure PSSA in any food and beverage production.

MORE INFO
FERTILIZER / UREA ANALYSIS – SOLIDSIZER

Features:

• Correlates to Sieve Results within 2%

• Particle distribution by major, minor diameter, area, perimeter

• Real time particle size analysis

MORE INFO
SUGAR

While the basics of mass sugar refining have not changed significantly in the last 200 years, it is important to take advantage of relatively newer technology to allow the production processes to run more efficiently and produce a higher yield. CANTY’s range of dynamic imaging systems can be used to do just that, by providing unparalleled views into the process, and generating useful data that can be used for process control and optimization. Sugar production processes where the CANTY vision based instrumentation can be employed include clarifying, crystallization, centrifuging, and product quality control.

MORE INFO
FRAC SAND ANALYSIS – SOLIDSIZER

The CANTY SolidSizer™ is a vision-based sensor used with the CANTY Vector System image processor for dry sand size measurement in a laboratory environment. The CantyVision™ Software accurately measures multiple aspects of the sand from area / perimeter / minor and major axis / etc. In comparison to a sieve which measures only minor axis the CantyVision™ software can correlate directly to a sieve so the customer does not have to change any QC documents. The SolidSizer™ can correlate within 2% of a sieve. A typical sieve analysis takes anywhere from 20-30 minutes including cleaning and setup for a 70-100 gram sample. On the SolidSizer™ that same sample takes less than 2 minutes. Also multiple screen distributions can be setup to accommodate multiple customers or areas in the process, hence eliminating the need for multiple runs on the same sand for different size distributions. After correlating to current methods of minor axis, customers find benefit in comparing minor axis to major axis and making sure the sand is round instead of needle shaped. Reduce lab time and make sure production samples are not skipped over due to lack of sample time available!

MORE INFO
LAB – SOLIDSIZER

The CANTY SolidSizer™ is a vision-based sensor used with the CANTY Vector System image processor for dry particle size measurement in a laboratory environment. The CantyVision™ Software accurately measures multiple aspects of the particles from area / perimeter / minor and major axis / etc. In comparison to a sieve which measures only minor axis the CantyVision™ software can correlate directly to a sieve so the customer does not have to change any QC documents. The SolidSizer™ can correlate within 2% of a sieve. A typical sieve analysis takes anywhere from 20-30 minutes including cleaning and setup for a 70-100 gram sample. On the SolidSizer™ that same sample takes less than 2 minutes. Also multiple screen distributions can be setup to accommodate multiple customers or areas in the process, hence eliminating the need for multiple runs on the same sand for different size distributions. After correlating to current methods of minor axis, customers find benefit in comparing minor axis to major axis and comparing shape factors. Reduce lab time and make sure production samples are not skipped over due to lack of sample time available!

MORE INFO
SOLIDSIZER™ TS SOLID PARTICLE ANALYSIS SYSTEM

10 um – 2,400 um Particle size analysis range. This system is designed for lab use to determine color speck detection, particle size, shape and distribution for flat or needle shape particles.

Relevant ASTM standards:
D8200 Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves.

D8392 Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials.

MORE INFO

TOP