SHORT LOOP SAMPLER – (OIL IN WATER / WATER IN OIL) ANALYZER

Features:

• Pre-designed sample line & sample point

• Easily Installed Modular Unit

• PPM/PPB & Particle Size Distribution

Liquid Particle Sizing – Oil & TSS in Water from JM CANTY on Vimeo.

Product Description

The SHORT LOOP SAMPLER™ Oil In Water Analyzer / Water In Oil Analyzer combining sampling point and the INFLOW™ Process Particle Analyzer, provides real time concentration and particle size analysis. The SHORT LOOP SAMPLER™ allows operators and skid manufacturers to test multiple point in their line using only one analyzer and verify the results by using the sample point to verify reading in the lab.  Models measure 0.7 micron – 20,000 micron particles under process conditions. By continuously measuring the product OIL, WATER, SAND, and GAS the OiW / WiO concentration and size is output 30 frames a second. This allows the user to see the impact of any change to the refining or drilling system. By using a vision based system CANTY can easily detect all phases and separate them to give PPM/PPB distribution as well as SIZE distribution of all particulates.  The system is designed to continuously sample from the center of the process stream and input the entire sample back into the stream so there is no loss of product when analyzing for concentration or particle size.

Min Fluid Velocity: 3 ft/s (If lower consult factory)

Max Fluid Velocity: 15 ft/s

1) DATASHEET
2) PRESENTATION – D02 FUEL CONFERENCE 2017 CANTY
2) PRESENTATION – On-Line Analysis of Fuel Products
for Particulate, Color, Water and HAZE

3) PRESENTATION – Dynamic Imaging Principle
Microbial Growth Detection in Fuels

4) TEST REPORT – Jet Fuel Testing Particle Testing
5) TEST REPORT – Jet Fuel Water Slug Test
2) APPLICATION QUESTIONNAIRE

Product Inquiry